The maintenance tips are as follows:
1. Avoid heat
If the engine piston temperature is too high, it is easy to overheat and melt, resulting in cylinder sticking; if rubber seals, triangular tapes, tires, etc. are overheated, they are prone to premature aging, reduced performance, and shortened service life; if the coils of electrical equipment such as starters, generators, and regulators are overheated, they are very easy to be destroyed and scrapped.
2. Avoid dirt
If the fuel filter, oil filter, air filter, hydraulic oil filter, and various filters are too dirty, the filtration effect will be poor. If the radiator fins, air-cooled engine cylinder block and cylinder head fins, cooler fins and other parts are too dirty, it will cause poor heat dissipation and too high temperature.
3. Avoid reverse
The engine cylinder gasket cannot be installed reversely during installation, otherwise it will cause premature burning and damage to the cylinder gasket; the engine fan blades cannot be installed reversely; for tires with directional patterns and herringbone pattern tires, the ground mark after installation should make the herringbone tip point to the rear.
4. Avoid missing
The engine valve lock plate should be installed in pairs. If it is missing or missing: it will cause the valve to lose control and damage the piston and other parts; the cotter pins, locking screws, safety plates or spring washers installed on the engine connecting rod bolts, flywheel bolts, and transmission shaft bolts, once missing, will likely cause serious faults during use; once the oil nozzle used to lubricate the gears in the engine timing gear chamber is missing, it will cause serious oil leakage at that place.
Different cars have different maintenance methods, but car maintenance methods also have their similarities, so car enthusiasts will adopt different maintenance methods.
Your message must be between 20-3,000 characters!